Icom OPC2478 9.8-Foot DC Power Cable for F5130D and F5330D Series

Description

Heavy-Duty DC Power Supply Cable for Mobile Transceivers

Ensure clean power distribution and maximum wattage output for high-power vehicle fleet radios.

The Icom OPC2478 is a genuine original equipment manufacturer (OEM) primary DC power cable designed to deliver safe, stable electricity to professional vehicle setups. Integrating the Icom OPC2478 9.8-foot DC power cable into your mobile communications hub connects your high-wattage transceiver directly to a vehicle's battery or a dedicated base station power supply. Measuring approximately 3 meters or 9.8 feet in total running length, this heavy-gauge harness supports high-power 45-watt and 50-watt mobile radio configurations that demand a continuous electrical draw of up to 20 Amps.

Engineered specifically for commercial vehicle fleets, emergency response trucks, and heavy logistics machinery, this power cord prevents hazardous voltage drop over its running distance. It comes equipped with robust dual inline safety fuses to isolate sensitive digital equipment from unexpected engine alternator spikes or electrical short circuits. Choosing the authentic Icom OPC2478 ensures your IDAS digital mobile platform maintains its full structural signal transmission range and loud audio projection without thermal issues or power cuts during heavy push-to-talk operation.

Key Features & Benefits

  • High-Amp Current Throughput: Rated for a continuous 20 Amp current load, providing full electrical delivery for high-power 45W and 50W mobile transceivers.
  • Extended Running Length: Features an approximate 3-meter (9.8-foot) span to accommodate clean, flexible under-dash routing, firewall pass-through paths, or direct battery compartment links.
  • Dual Inline Surge Protection: Outfitted with heavy-duty inline fuses along the positive and negative wire paths to block high-voltage surges and shield internal radio microprocessors.
  • Premium Heavy-Gauge Wiring: Constructed with high-grade multi-strand copper conductors encased in a durable, heat-resistant insulation jacket to eliminate electrical line resistance.
  • Secure Locking Plug Interface: Snaps directly into matching rear power ports on compatible mobile chassis, providing a tight mechanical seat that resists rough vehicle vibration.

Specifications

Attribute Details
Brand Icom
Model/SKU OPC2478 / OPC-2478
Cable Type DC Power Wire Harness
Cable Length Metric 3 Meters (Approximate)
Cable Length Imperial 9.8 Feet (Approximate)
Maximum Current Load 20 Amps
Supported Power Output 45 Watts / 50 Watts Mobile Units
Safety Circuitry Integrated Dual Inline Fuse Blocks

Compatibility

F5130D F6130D F5330D F6330D

Recommended Accessories

More Resources

Frequently Asked Questions

What is the physical length and amp rating of this power cord?

This cable measures approximately 3 meters (9.8 feet) and is custom-engineered to handle a high-amp continuous electrical draw of up to 20 Amps.

Is this cable meant to separate a control display panel from the main body?

No, this is purely a high-amp DC power supply cable to connect the radio to a battery source. Separation setups require a specialized multi-pin separation data cable instead.

Does this power assembly feature any built-in circuit protection?

Yes, the harness includes dual integrated inline safety fuses to shield your electronic mobile device from vehicle battery surges and over-current faults.

Can I use this wire harness to run a 25-watt low-power mobile radio?

Yes, while it is optimized for high-power 45W and 50W models, it is perfectly safe to use for lower-wattage models as long as the connector style matches.

Do I need specialized tools to connect this cord to the radio chassis?

No tools are required for the radio side; the heavy-duty molded connector locks securely into the transceiver's native rear power socket with a simple push-on click.

What manufacturer protection covers this factory wiring hardware?

This genuine original factory part comes backed by Icom's standard one-year commercial accessory warranty against defects in craftsmanship or materials.

 

Warranty

1-year manufacturer’s warranty.

Icom OPC2478 9.8-Foot DC Power Cable for F5130D and F5330D Series

Product form

Free pickup in our shop(s)

SKU: OPC2478

$45.00 $32.99

    • Shipped today? Order within: Jun 30, 2026 17:00:00 -0400

    Description

    Heavy-Duty DC Power Supply Cable for Mobile Transceivers

    Ensure clean power distribution and maximum wattage output for high-power vehicle fleet radios.

    The Icom OPC2478 is a genuine original equipment manufacturer (OEM) primary DC power cable designed to deliver safe, stable electricity to professional vehicle setups. Integrating the Icom OPC2478 9.8-foot DC power cable into your mobile communications hub connects your high-wattage transceiver directly to a vehicle's battery or a dedicated base station power supply. Measuring approximately 3 meters or 9.8 feet in total running length, this heavy-gauge harness supports high-power 45-watt and 50-watt mobile radio configurations that demand a continuous electrical draw of up to 20 Amps.

    Engineered specifically for commercial vehicle fleets, emergency response trucks, and heavy logistics machinery, this power cord prevents hazardous voltage drop over its running distance. It comes equipped with robust dual inline safety fuses to isolate sensitive digital equipment from unexpected engine alternator spikes or electrical short circuits. Choosing the authentic Icom OPC2478 ensures your IDAS digital mobile platform maintains its full structural signal transmission range and loud audio projection without thermal issues or power cuts during heavy push-to-talk operation.

    Key Features & Benefits

    • High-Amp Current Throughput: Rated for a continuous 20 Amp current load, providing full electrical delivery for high-power 45W and 50W mobile transceivers.
    • Extended Running Length: Features an approximate 3-meter (9.8-foot) span to accommodate clean, flexible under-dash routing, firewall pass-through paths, or direct battery compartment links.
    • Dual Inline Surge Protection: Outfitted with heavy-duty inline fuses along the positive and negative wire paths to block high-voltage surges and shield internal radio microprocessors.
    • Premium Heavy-Gauge Wiring: Constructed with high-grade multi-strand copper conductors encased in a durable, heat-resistant insulation jacket to eliminate electrical line resistance.
    • Secure Locking Plug Interface: Snaps directly into matching rear power ports on compatible mobile chassis, providing a tight mechanical seat that resists rough vehicle vibration.

    Specifications

    Attribute Details
    Brand Icom
    Model/SKU OPC2478 / OPC-2478
    Cable Type DC Power Wire Harness
    Cable Length Metric 3 Meters (Approximate)
    Cable Length Imperial 9.8 Feet (Approximate)
    Maximum Current Load 20 Amps
    Supported Power Output 45 Watts / 50 Watts Mobile Units
    Safety Circuitry Integrated Dual Inline Fuse Blocks

    Compatibility

    F5130D F6130D F5330D F6330D

    Recommended Accessories

    More Resources

    Frequently Asked Questions

    What is the physical length and amp rating of this power cord?

    This cable measures approximately 3 meters (9.8 feet) and is custom-engineered to handle a high-amp continuous electrical draw of up to 20 Amps.

    Is this cable meant to separate a control display panel from the main body?

    No, this is purely a high-amp DC power supply cable to connect the radio to a battery source. Separation setups require a specialized multi-pin separation data cable instead.

    Does this power assembly feature any built-in circuit protection?

    Yes, the harness includes dual integrated inline safety fuses to shield your electronic mobile device from vehicle battery surges and over-current faults.

    Can I use this wire harness to run a 25-watt low-power mobile radio?

    Yes, while it is optimized for high-power 45W and 50W models, it is perfectly safe to use for lower-wattage models as long as the connector style matches.

    Do I need specialized tools to connect this cord to the radio chassis?

    No tools are required for the radio side; the heavy-duty molded connector locks securely into the transceiver's native rear power socket with a simple push-on click.

    What manufacturer protection covers this factory wiring hardware?

    This genuine original factory part comes backed by Icom's standard one-year commercial accessory warranty against defects in craftsmanship or materials.

     

    Warranty

    1-year manufacturer’s warranty.

    Recently viewed products

        • Ach Direct Debit
        • Amazon
        • American Express
        • Apple Pay
        • Diners Club
        • Discover
        • Google Pay
        • Mastercard
        • PayPal
        • Shop Pay
        • USDC
        • Visa

        © 2026 Atlantic Radio Communications Corp.

        Login

        Forgot your password?

        Don't have an account yet?
        Create account