Icom Two-Way Radios and Accessories

5m audio conn. cable between the VEPG3 and FR5000 series.

Read more less

Icom IASANTSW2 Dual Antenna Switch High-Efficiency RF Switching for Repeater and Base Station Operations The Icom IASANTSW2 is a professional-grade dual antenna switch engineered for Icom digital repeaters and base stations. This specialized RF component allows a repeater to operate using a single antenna without the need for a traditional, bulky duplexer. By automatically switching the signal path between transmit (TX) and receive (RX) modes, the Icom IASANTSW2 simplifies system architecture while maintaining signal integrity for mission-critical communications. Designed specifically for the FR5300 and FR6300 series, this switch is the ideal solution for installations where rack space is limited or where a cost-effective alternative to a tuned duplexer is required. The Icom IASANTSW2 provides rapid, reliable switching to ensure that the receiver is protected during transmission while maximizing sensitivity during standby, making it a vital accessory for both temporary deployments and permanent base station hubs. Key Features & Benefits Single Antenna Operation: Eliminates the requirement for an external duplexer, allowing the repeater to utilize a single antenna for both TX and RX. Automatic RF Switching: Seamlessly transitions between transmit and receive paths based on the radio's operation, ensuring low-latency communication. Compact Integration: Perfect for space-constrained environments where a standard cavity duplexer cannot be accommodated. Reduced System Complexity: Simplifies the RF signal path and reduces the number of interconnecting cables and potential points of failure. OEM Reliability: Genuine Icom accessory designed to meet the exact electrical specifications and timing requirements of the FR-series repeaters. Specifications Brand: Icom Model Number: IASANTSW2 Device Type: RF Antenna Switch Primary Function: TX/RX Switching (Simplex operation on a single antenna) Mounting: Internal or localized installation depending on chassis configuration Compatibility FR5300 FR6300 What's Included Description SKU Status Dual Antenna Switch IASANTSW2 ✅ Included Recommended Accessories Description SKU Icom VHF Digital Repeater FR5300 Icom UHF Digital Repeater FR6300 Frequently Asked Questions Does this switch provide the same performance as a duplexer? While it allows single-antenna use, this switch operates in a "switched" mode. Unlike a duplexer, it does not allow for simultaneous transmit and receive (full duplex) on a single antenna; it is intended for automated simplex-style repeater operation. Is it difficult to install? The Icom IASANTSW2 is designed for straightforward integration with the FR5300/6300 series, typically connecting directly to the radio's internal control logic. Can this be used with other repeater brands? This switch is specifically optimized for the timing and voltage requirements of Icom digital hardware and is not recommended for non-Icom systems. Warranty 1-year manufacturer's warranty.

Read more less

IA-SANTSW1 single antenna switch for base station operation.

Read more less

Trunking/Network controller board (1 per repeater)

Read more less

Icom RSMGR1 Remote System Manager Software Real-Time Monitoring and Diagnostic Suite for IDAS MultiTrunk The Icom RSMGR1 is a powerful system management solution designed to provide network administrators with comprehensive remote oversight of IDAS MultiTrunk networks. This software suite allows for the centralized monitoring of all repeaters within a system, providing real-time data on repeater health, traffic statistics, and connectivity status. By utilizing the Icom RSMGR1, organizations can proactively manage their communication infrastructure, identifying potential hardware issues such as PLL unlocks, voltage fluctuations, or high internal temperatures before they lead to system-wide downtime. Beyond hardware diagnostics, the Icom RSMGR1 serves as a robust logging and analytical tool, capturing detailed communication, registration, and traffic logs that can be filtered by User ID, call type, or site code. The software features an intuitive "Map Window" for visual site layouts and a "Mesh Ping Status" tool to verify multi-site connectivity across the entire network. Supplied on a USB flash drive that acts as a hardware protection key, the Icom RSMGR1 is the essential management interface for maintaining peak operational efficiency in complex digital trunking environments. Advanced Network Oversight for IDAS Digital Trunking Systems Key Features & Benefits Comprehensive Repeater Diagnostics: Monitor critical health metrics including TX/RX PLL status, power supply voltage, internal temperature, and fan operation. Automated E-mail Alerts: Instantly notifies administrators via e-mail the moment an alarm or system disconnection occurs, enabling rapid response times. Detailed Traffic Logging: Records and filters registration, communication, and search logs by date, site code, or user ID for advanced system auditing. Mesh Ping Connectivity Testing: Sends ping commands across all site combinations to visually confirm network stability and link integrity. Visual Map Interface: Allows administrators to overlay repeater site icons onto custom map images or network diagrams for intuitive geographic monitoring. VPN Router Integration: Supports monitoring of the SR-VPN1 VPN router via Syslog, providing a unified view of both radio and network hardware. Hardware Key Protection: Supplied on a secure USB flash drive, ensuring the software license remains protected and portable for authorized workstations. Specifications Feature Specification Operating System Windows 10, 8.1, 7 SP1, or Server 2012/2008 Minimum RAM 2 GB or higher Hard Disk Space 500 GB minimum (for log retention) Network Speed 100 Mbps or faster (Fixed IP required) Interface USB 2.0 (for Hardware Key) System Requirement UC-FR5000 MCU Revision 4.00 or later Compatibility FR5000 FR6000 FR5300 FR6300 UC-FR5000 SR-VPN1 CY5300 CY6300 Recommended Accessories Icom RoIP Gateway (VEPG4) Icom IDAS MultiTrunk Repeater (FR5300) Frequently Asked Questions Does this software require a dedicated PC? Yes. For continuous monitoring and log retention, it is highly recommended to install the Icom RSMGR1 on a dedicated server or workstation with a fixed IP address and 100Mbps LAN connection. Can I monitor my system from home? If your network is configured with a secure VPN (such as via the SR-VPN1), you can access the RSMGR1 interface remotely to check system status and logs. What happens if I lose the USB drive? The USB drive serves as the hardware license key. The software will not function without it, so it should be kept securely attached to the management terminal. Warranty 1-year manufacturer's warranty on the software media and hardware key No returns or refunds. This software package does not include support. 

Read more less

Icom CT24 Digital Voice Converter Professional AMBE+2 Audio Codec Interface The Icom CT24 is a high-performance digital voice converter designed to provide seamless audio codec translation between digital transceivers and network interfaces. Utilizing the industry-standard AMBE+2 vocoder, this compact device handles the complex encoding and decoding required for high-integrity digital voice communications. The Icom CT24 is an essential component for operators integrating digital radio systems with IP-based dispatch or gateway solutions, ensuring that voice quality remains crisp and intelligible across the entire network architecture. Engineered for reliable plug-and-play operation, the Icom CT24 is supplied with the RCFS10 Remote Communicator software and is fully compatible with the VEPG3 RoIP Gateway. Its compact 15 cm cable design and USB-MiniB interface allow for a clean, low-profile installation in server rooms or dispatch consoles. By utilizing the Icom CT24, organizations can bridge the gap between physical digital radio hardware and software-defined communication platforms without the signal degradation typically associated with analog-to-digital conversions. Key Features & Benefits Advanced AMBE+2 Encoding: Employs the gold-standard vocoder for digital radio, providing superior voice clarity and effective noise suppression. Seamless Codec Conversion: Bridges digital transceiver audio with network-based communication software for efficient RoIP integration. Optimized for VEPG3: Specifically designed to work in tandem with the VEPG3 gateway to expand the reach of digital radio networks over IP. Software-Ready Deployment: Comes supplied with RCFS10 software, allowing for immediate setup of remote communicator stations. Low-Profile USB Interface: Features a USB-MiniB connector for simple data and power delivery, eliminating the need for external power bricks. Compact Integration: The short 15 cm cable length prevents cable clutter in high-density dispatch and gateway environments. Specifications Feature Specification Vocoder Type AMBE+2 Connector Type USB-MiniB Cable Length 15 cm Application Digital Encode/Decode Supplied Software RCFS10 Compatibility CY5300 CY6300 FR5300 FR6300 What's Included Description SKU Status Digital Voice Converter CT24 ✅ Included Remote Communicator Software RCFS10 ✅ Included USB Interface Cable (15cm) N/A ✅ Included RoIP Gateway VEPG4 ❌ Sold Separately Recommended Accessories Icom RoIP Gateway (VEPG4) Icom Desktop Microphone (SM26) Frequently Asked Questions What software comes with the CT24? The Icom CT24 is supplied with the RCFS10 Remote Communicator software, which is used for managing digital voice traffic across your network. Does this work with older analog repeaters? No. The CT24 is specifically designed for digital codec conversion using AMBE+2, which is the standard for Icom IDAS and other modern digital platforms. Is an external power supply required? No. The Icom CT24 draws the small amount of power it needs directly from the USB-MiniB connection. Warranty 1-year manufacturer's warranty.

Read more less

Icom IASMNT1105 Battery Charger Rackmount Kit Space-Optimized Mounting for Industrial Power Systems The Icom IASMNT1105 is a professional-grade rackmount kit designed to streamline the organization of battery charging systems within standard equipment racks. Specifically engineered for the IASPS1022 power supply and charger series, this rugged mounting solution allows for the secure installation of one or two chargers in a centralized location. By consolidating power hardware into a rack environment, the IASMNT1105 reduces cable clutter and optimizes the footprint of your mission-critical radio infrastructure. Built to handle the thermal and structural demands of continuous-duty environments, the Icom IASMNT1105 ensures your power supplies remain stable and accessible. This kit is an essential component for system integrators and radio technicians managing repeater sites or base station hubs. Whether you are deploying a new digital system or upgrading a legacy analog site, this rackmount kit provides the professional finish and mechanical reliability expected in high-tier communication facilities. Key Features & Benefits Dual Charger Capacity: Specifically designed to house one or two IASPS1022 battery chargers or power supplies in a single assembly. Standard Rack Integration: Fits seamlessly into standard 19-inch equipment racks, ensuring a clean and professional installation. Optimized Cable Management: Consolidates power units to simplify routing and reduce the risk of accidental cable disconnection. Enhanced Heat Dissipation: Structured to provide adequate spacing and support for power supplies operating in 100% duty cycle environments. Industrial Durability: Manufactured with high-quality materials to withstand the weight and vibration associated with high-power base station hardware. Specifications Brand: Icom Model Number: IASMNT1105 Device Capacity: 1 to 2 Units Compatible Hardware: IASPS1022 Power Supply/Charger Mounting Type: Standard Equipment Rackmount Compatibility FR5200H FR6200H FR9010 FR9020 CY5000 CY6000 CY5300 CY6300 FR5300 FR6300 Recommended Accessories Description SKU Icom Battery Charger Power Supply IASPS1022 Icom VHF Digital Repeater FR5300 Icom UHF Digital Repeater FR6300 Standard Rack Mount Screws RMS1U Frequently Asked Questions Does this kit include the power supplies? No. The Icom IASMNT1105 is the mounting framework only. The IASPS1022 units must be purchased separately. Can I mount only one charger with this kit? Yes. The kit is designed to hold either a single unit or two units side-by-side depending on your system requirements. Is this compatible with the FR9010 series? Yes. It is a verified mounting solution for power systems used with the FR9010 and FR9020 high-power repeaters. Warranty 1-year manufacturer's warranty.

Read more less

Icom IASDP1001 DC Distribution Panel Advanced 12/24 VDC Power Management with SNMP Remote Control The Icom IASDP1001 is a high-performance DC distribution panel designed to provide centralized power management and monitoring for mission-critical radio infrastructure. Capable of handling both 12 VDC and 24 VDC systems, this rugged panel allows system administrators to manage and protect up to 12 individual loads. It is an essential component for repeater sites, dispatch centers, and base station hubs where power reliability and remote oversight are paramount. Beyond simple power distribution, the Icom IASDP1001 features advanced Remote Power Control and SNMP (Simple Network Management Protocol) support. This allows technicians to monitor current draw, voltage levels, and fuse status in real-time over an IP network. The ability to remotely cycle power to individual ports enables efficient troubleshooting and "hard reboots" of equipment without the need for an expensive and time-consuming site visit, significantly reducing system downtime. Key Features & Benefits Multi-Load Management: Securely distributes power to up to 12 separate devices from a single centralized DC source. 12V/24V Versatility: Supports both standard 12V and 24V DC architectures, providing flexibility for diverse equipment requirements. Remote Power Control: Individual port control allows users to turn loads on or off remotely via a web interface or network management software. SNMP Integration: Full SNMP support provides automated alerts and detailed logging of power conditions for proactive system maintenance. Rugged Rackmount Design: Built for industrial environments, fitting seamlessly into standard 19-inch equipment racks to optimize space. Enhanced Safety: Provides individual circuit protection to prevent a single equipment failure from affecting the entire power bus. Specifications Brand: Icom Model Number: IASDP1001 Input Voltage: 12/24 VDC Number of Outputs: 12 Channels Management Protocol: SNMP / Web GUI Form Factor: Rackmount Compatibility CY5300 CY6300 FR5300 FR6300 FR9020 RFTP25 What's Included Description SKU Status DC Distribution Panel IASDP1001 ✅ Included Mounting Hardware N/A ✅ Included Power Connectors N/A ✅ Included Recommended Accessories Description SKU Icom Power Supply / Charger IASPS1022 Icom VHF Digital Repeater FR5300 Icom UHF Digital Repeater FR6300 Icom Rackmount Kit IASMNT1105 Frequently Asked Questions Can I monitor the power usage of each load? Yes. Through the SNMP and web interface, you can monitor the status and power metrics for each of the 12 managed loads. Does this unit protect against power surges? The panel provides circuit protection for each individual load to isolate faults and prevent damage to connected hardware. Is the remote control secure? Yes, the management interface typically supports password protection and secure protocols to prevent unauthorized access to your power controls. Warranty 1-year manufacturer's warranty.

Read more less

Icom JPSPTG10 - pilot tone generator for analog operation only.

Read more less

Multi-site (conventional/trunking) IP repeater link card

Read more less

Icom CFFR5000 02 Repeater Link Card - Multi-Site Conventional IP The Icom CFFR5000 02 is a vital Multi-Site (conventional only) IP Repeater Link Card, designed to expand the capabilities of your IDAS repeater network. This card is an essential component required for each compatible repeater, allowing for the seamless integration of multiple sites into a single, cohesive conventional IP system. The Icom CFFR5000 02 enhances your communication infrastructure by enabling multi-site operation without compromising on the simplicity of conventional modes. It works in conjunction with either the UC-FR5000 or UCFR5300 board, providing the necessary link for expanded coverage and reliable signal distribution across various repeater series. Key Features Multi-Site Conventional IP Operation: Enables multiple repeater sites to link and operate together in a conventional IP network. Requires Controller Board: Functions by integrating with either the UC-FR5000 or UCFR5300 repeater controller board. Enhances Network Coverage: Allows for the expansion of conventional radio system coverage across a wider geographical area. Reliable IP Connectivity: Utilizes IP networking for robust and stable repeater linking. Essential System Component: One link card is required per compatible repeater for multi-site functionality. Compatibility CY5300 CY6300 FR5300 FR6300 URFR5300 URFR6300 FR5000 FR6000 FR5200H FR6200H IAS 120D IAS 150D Benefits Expanded Communication Range: Connects multiple repeaters to extend your radio system's coverage for larger operational areas. Cost-Effective Network Expansion: Utilizes IP infrastructure to link repeaters efficiently, reducing the need for complex cabling. Reliable Conventional System: Ensures stable and clear communication across all linked sites in a conventional setup. Simplified System Management: Integrates seamlessly with required controller boards for straightforward configuration. Enhanced Operational Flexibility: Allows for greater freedom in deploying repeaters to meet specific coverage needs.   Warranty 1-year manufacturer's warranty

Read more less

Icom IASDUP50CY Internal Duplexer Assembly Kit Seamless Single-Antenna Integration for CY Series Repeaters The Icom IASDUP50CY is a specialized internal duplexer assembly kit designed to enhance the efficiency and footprint of Icom CY series repeaters. This kit allows the CY5300 and CY6300 to operate using a single antenna for both transmitting and receiving signals, eliminating the need for two separate antennas or an externally mounted duplexer. By integrating the duplexer internally, system administrators can maintain a professional, compact setup that is ideal for space-constrained rack environments or mobile command centers. Engineered for high-performance RF isolation, the Icom IASDUP50CY ensures that the powerful transmit signal does not interfere with the sensitive receiver. The kit is comprehensive, including high-quality RF jumpers terminated with precision N-male connectors and all necessary mounting screws for a secure factory-style installation. This assembly is a vital component for those looking to simplify their RF signal path while maximizing the coverage and reliability of their digital or analog repeater system. Key Features & Benefits Single Antenna Operation: Enables the repeater to transmit and receive through a single antenna port, reducing installation complexity and antenna site costs. Internal Mounting: Designed to fit perfectly within the CY series chassis, protecting the duplexer and jumpers from external damage or interference. High-Quality RF Jumpers: Includes heavy-duty coaxial jumpers with N-male connectors to ensure a low-loss, high-retention signal path. Optimized Isolation: Provides the necessary frequency separation to prevent receiver desensitization during high-power transmissions. Complete Installation Kit: Comes supplied with all required hardware and screws, ensuring a straightforward and secure assembly process. Specifications Brand: Icom Model Number: IASDUP50CY Compatible Connectors: N-Male Components Included: Duplexer bracket, RF jumpers, and mounting hardware Application: Internal Repeater Integration Compatibility Systems CY5300 CY6300 What's Included Description SKU Status Internal Duplexer Bracket N/A ✅ Included RF Jumpers (N-Male) N/A ✅ Included Mounting Screws N/A ✅ Included Recommended Accessories Description SKU Icom VHF Digital Repeater CY5300 Icom UHF Digital Repeater CY6300 Icom DC Distribution Panel IASDP1001 High-Gain Base Station Antenna F-ANT-UHF Frequently Asked Questions Is the duplexer pre-tuned? This kit typically refers to the assembly hardware and jumpers. The duplexer itself usually requires professional tuning to your specific TX and RX frequencies before final installation. Does this kit support 50-watt operation? Yes, the Icom IASDUP50CY is designed to handle the power output levels associated with the CY5300 and CY6300 repeater series. Can I install this myself? While the kit includes the hardware, it is recommended that a qualified RF technician performs the installation to ensure the duplexer is tuned and the SWR is verified. Warranty 1-year manufacturer's warranty.

Read more less

Icom IASMNT1070 40U Welded Steel 2-Post Rack Professional High-Capacity Infrastructure for Multi-Site Systems The Icom IASMNT1070 is a high-stature, industrial-grade 40U rack solution designed for the most demanding communication infrastructure and large-scale repeater deployments. Constructed from precision-welded steel, this 2-post open-frame rack supports a massive 1,500lb load capacity. The Icom IASMNT1070 is engineered to centralize an entire regional network's worth of digital repeaters, power systems, and specialized RF filtering hardware into a single, high-stability vertical platform. Standing 70 inches tall with a standard 19-inch equipment width, the Icom IASMNT1070 offers maximum vertical real estate, making it the premier choice for master dispatch hubs, high-density server rooms, and critical tower sites. The fully welded architecture eliminates the structural sag and mechanical vibration common in bolt-together racks, ensuring that sensitive digital components and heavy 4-cavity pre-selectors remain perfectly secured. By utilizing the Icom IASMNT1070, system administrators gain unhindered 360-degree access for cable management and maintenance while ensuring their Icom CY and FR series assets are protected by an elite-level mounting solution. Key Features & Benefits 40U High-Density Storage: Provides a massive 70 inches of vertical mounting space, allowing for the consolidation of extensive repeater stacks and trunking controllers. 1,500lb Load Rating: Engineered with reinforced welded steel to safely support multiple high-wattage repeaters, heavy-duty duplexers, and full-scale power distribution units. Welded Structural Integrity: Offers superior seismic stability and rigidity compared to standard modular racks, providing a permanent foundation for mission-critical hardware. Open-Frame Airflow Optimization: Ensures zero obstruction for equipment cooling fans, which is vital for maintaining thermal stability in continuous-duty IDAS digital systems. Standard 19-Inch Compatibility: Fully compatible with the entire ecosystem of Icom rack-mount accessories, including IASPS power supplies and IASMNT mounting trays. Streamlined Maintenance Access: The 2-post design allows technicians to easily route high-gauge power lines and high-shielding coaxial cables without side-panel interference. Specifications Feature Specification Rack Units 40U Type 2-Post Open Frame Construction Fully Welded Steel Weight Capacity 1,500 lbs Dimensions 70" (H) x 19" (W) Finish Industrial Grade Black Powder Coat Compatibility CY5300 CY6300 FR5300 FR6300 What's Included Description SKU Status 40U Welded 2-Post Rack IASMNT1070 ✅ Included Floor Mounting Base N/A ✅ Included Equipment Trays IASMNT1102 ❌ Sold Separately Mounting Screws N/A ❌ Sold Separately Recommended Accessories Icom 30A Rack-Mount Power Supply (IASPS1022) Icom VHF Digital Repeater (FR5300) Icom UHF Digital Repeater (FR6300) Frequently Asked Questions Is this rack shipped assembled? Yes. Due to its fully welded construction for maximum strength, the IASMNT1070 is shipped as a single completed frame and does not require field assembly. Should I bolt this rack to the floor? Absolutely. At 70 inches tall and with a potential 1,500lb load, the IASMNT1070 should be professionally bolted to a concrete floor or equipment platform using the pre-drilled holes in the base for safety and stability. How many repeaters can I fit in this rack? A standard Icom repeater setup with power typically takes 3U to 5U. In a 40U rack, you could theoretically fit up to 8–10 complete repeater stations while still leaving room for cable management and airflow. Warranty 1-year manufacturer's warranty.

Read more less

63x19 welded steel 2-post rack; 63U, 1,500lb weight capacity.

Read more less

Icom IASMNT1042 24U Welded Steel 2-Post Rack Ultra-Heavy-Duty 1,500lb Capacity Repeater Rack The Icom IASMNT1042 is a high-capacity, industrial-grade 24U rack solution engineered to house large-scale communication infrastructure and heavy RF components. Constructed from fully welded steel, this 2-post rack is designed to support a massive 1,500lb load, making it the premier choice for multi-repeater systems, heavy-duty duplexers, and high-output power supplies. The Icom IASMNT1042 provides the ultimate structural foundation for regional dispatch hubs and mission-critical tower sites where equipment security and weight distribution are paramount. Standing 42 inches tall with a standard 19-inch width, the Icom IASMNT1042 optimizes vertical space while maintaining the open-frame architecture necessary for maximum thermal management. The welded steel construction eliminates the structural weak points found in bolt-together units, ensuring that sensitive digital repeaters remain perfectly aligned and protected from mechanical stress. By deploying the Icom IASMNT1042, organizations can centralize their entire Icom CY and FR series network into a single, high-stability platform that facilitates professional cable routing and rapid hardware accessibility. Key Features & Benefits Massive 1,500lb Capacity: Reinforced welded steel construction allows for the secure mounting of heavy 4-cavity pre-selectors, large duplexers, and multiple power units. 24U Professional Height: Provides 42 inches of vertical mounting space, allowing for complex multi-repeater configurations and expansion room for future hardware. Welded Steel Integrity: Offers superior rigidity and seismic stability compared to standard flat-pack racks, protecting your investment from structural sag. Standard 19-Inch Mounting: Fully compatible with all Icom rack-mount trays, 1RU power supplies, and high-tier digital repeaters. Open-Frame Airflow: Ensures zero obstruction for equipment cooling fans, maintaining optimal operating temperatures for continuous-duty transmitters. Simplified Access: The 2-post design provides 360-degree access to coaxial terminations and power manifolds, significantly reducing maintenance time. Specifications Feature Specification Rack Units 24U Type 2-Post Open Frame Construction Fully Welded Steel Weight Capacity 1,500 lbs Dimensions 42" (H) x 19" (W) Finish Industrial Grade Black Powder Coat Compatibility CY5300 CY6300 FR5300 FR6300 FR3020 FR9020 What's Included Description SKU Status 24U Welded 2-Post Rack IASMNT1042 ✅ Included Floor Mounting Base N/A ✅ Included Equipment Trays IASMNT1102 ❌ Sold Separately Mounting Hardware N/A ❌ Sold Separately Recommended Accessories Icom 30A Rack-Mount Power Supply (IASPS1022) Icom VHF Digital Repeater (FR5300) Icom UHF Digital Repeater (FR6300) Frequently Asked Questions Does this rack require assembly? No. Unlike desktop units, the IASMNT1042 features a fully welded steel frame for maximum strength and arrives ready for floor mounting and equipment installation. Can I mount this to the floor for added stability? Yes. The base is designed with pre-drilled holes for floor-bolting, which is highly recommended when utilizing the full 1,500lb weight capacity. Is 24U enough for a trunked system? For most 4-channel to 8-channel trunked systems, 24U provides ample space for repeaters, controllers, and localized power distribution. Warranty 1-year manufacturer's warranty.

Read more less

Icom IASMNT1028 16U Desktop 2-Post Rack Heavy-Duty Open Frame Solution for Repeater Infrastructure The Icom IASMNT1028 is a professional-grade, 16U desktop open-frame rack designed to centralize and secure mission-critical repeater systems and power supplies. With a substantial 350lb weight capacity, this 2-post rack is engineered to manage the heavy physical load of multiple digital repeaters, duplexers, and rack-mounted power units. The Icom IASMNT1028 provides an organized, accessible platform for dispatch centers, server rooms, and remote site enclosures where a full-sized cabinet is unnecessary but structural integrity is paramount. Measuring 28 inches in height and 19 inches in width, the Icom IASMNT1028 is optimized for desktop or shelf-top placement, bringing communication infrastructure to a comfortable working height for technicians. The open-frame design ensures maximum airflow and passive cooling, which is essential for preventing thermal shutdown in high-duty cycle digital repeaters. By utilizing the Icom IASMNT1028, organizations can ensure their Icom CY and FR series infrastructure is mounted according to professional standards, facilitating easy cable management and rapid equipment maintenance. Key Features & Benefits 16U Vertical Capacity: Provides ample space to stack multiple repeaters, power supplies, and rack trays in a compact vertical footprint. 350lb Weight Rating: Built from heavy-gauge steel to safely support the intense weight of transformers, 4-cavity filters, and heavy repeater chassis. Open-Frame Architecture: Facilitates 360-degree airflow to keep sensitive RF equipment cool and provides unrestricted access to rear-panel wiring. Desktop-Ready Design: Features a stable base for placement on workbenches, equipment shelves, or heavy-duty office furniture. Standard 19-Inch Width: Compatible with all standard rack-mount equipment, including Icom’s proprietary rack trays and power supply assemblies. Simplified Cable Management: The 2-post design allows for easy routing of coaxial cables and power lines without the obstruction of side panels. Specifications Feature Specification Rack Units 16U Type 2-Post Open Frame Weight Capacity 350 lbs Dimensions 28" (H) x 19" (W) Material Heavy-Gauge Steel Mounting Desktop / Shelf-Top Compatibility CY5300 CY6300 FR5300 FR6300 FR3020 FR9020 IASPS1022 IASPS1220 What's Included Description SKU Status 16U 2-Post Desktop Rack IASMNT1028 ✅ Included Assembly Hardware N/A ✅ Included Rack Equipment Screws N/A ❌ Sold Separately Equipment Trays IASMNT1102 ❌ Sold Separately Recommended Accessories Icom 30A Rack-Mount Power Supply (IASPS1022) Icom Rack Mounting Tray (IASMNT1102) Icom VHF Digital Repeater (FR5300) Icom UHF Digital Repeater (FR6300) Frequently Asked Questions Does this rack require assembly? Yes. The IASMNT1028 typically ships flat-packed to reduce shipping costs and includes the necessary high-strength bolts for a secure assembly. Can I mount this to the floor? While designed as a desktop unit, many users secure the base to a heavy-duty shelf or platform for added stability in high-vibration environments. Is 16U enough space for two repeaters and power? Absolutely. A standard repeater and power supply setup usually occupies 3U to 5U, leaving plenty of room in a 16U rack for additional equipment, cooling fans, or battery chargers. Warranty 1-year manufacturer's warranty.

Read more less

Icom HM193 is a hand microphone for the F8101 series.

Read more less

Icom HM192 The Icom HM192 is a remote control microphone for F8101 (requires separation cable).

Read more less

UX248 is a GPS unit for HF transceivers.(F8101 series)

Read more less

Antenna tuner control cable for AT140/AH740 for F8101 (32.8')

Read more less

Icom OPC2308 is a GPS/External modem connection cable.

Read more less

Icom - cloning and data cable with USB connection.

Read more less

RMK4 01 - dual head and separation kit for F9511HT. 

Read more less

Remote mounting kit for the F9511/F9521 dual head kit.

Read more less

Icom OPC1962 The Icom OPC1962 is a DC power cord for F9511HT mobile.   *1-year manufacturer's warranty.

Read more less

Icom RMK7 Dual-head Separation Kit The Icom RMK7 is a dual-head and separation kit with two controls that can be operated from two remote positions. Compatible with P25 radios (F7510, F7520 and F7540).   *1-year manufacturer's warranty.

Read more less

Icom OPC-2374 8m/26.2ft separation cable for HM218

Read more less

Icom OPC-2367 8m/26.2ft separation cable for RMK5/RMK7

Read more less

OPC2365 3m/9.8ft separation cable for RMK5/RMK7

Read more less

Icom ISL-CHEX The ISL-CHEX is a memory channel expansion (4000 channels). This expansion is compatible with with F5400D and F6400D. *Not eligible for further discounts.

Read more less

Icom RMK3 01 Bracket & face plate for remote mounting. cable not included

Read more less

Icom IA-10401 The Icom IA-10401 is a split dispatch dongle for F5061/6061/D.

Read more less

Audio amp board for F5061D with RR firmware installed.

Read more less

Icom F5061 IGN SENSE CABLE The Icom F5061 is a 96" cable with 3A fuse for the F5061 - F6061 series.

Read more less

Icom ISL-P25VS - P25 conventional voting scan license.

Read more less

Icom ISL-P25DS They Icom ISL-P25DS is a P25 packet data service (GPS/text) license. *License not eligible for further discounts.

Read more less

Icom RSBC225 The Icom RSBC225 is a battery management software for Icom Two Way Radio Batteries. This software solution works with Icom's BC-225 smart rapid charger, which is compatible with these Icom batteries: BP283, BP284, BP290 and BP294. WE ARE AUTHORIZED ICOM DEALER.

Read more less

High-Speed Data Cloning for Professional Fleet Management The Icom OPC2362 is a professional-grade zone copy cable engineered for direct cloning between 14-pin Icom handheld portables and 10-pin DIN mobile units. Measuring 800 mm in length, this cable provides a secure and reliable link for technicians to synchronize critical data without the need for a secondary PC interface. By facilitating the instant copying of zone information, the OPC2362 streamlines the programming process, ensuring that mobile units in a vehicle fleet perfectly match the configuration of the handheld portables used in the field. Constructed with a robust build quality, this cable is specifically tailored for on-site use where speed and reliability are paramount. Whether you are deploying a new P25 digital system or updating existing IDAS™ parameters, the Icom OPC2362 eliminates the manual entry of channel data, reducing the risk of human error and significantly cutting down deployment time. Its heavy-duty shielding ensures that data transfer remains stable and free from interference, even in demanding professional environments. Key Features & Benefits Direct Zone Copying: Facilitates the seamless transfer of zone information between different radio form factors. Handheld to Mobile Interface: Specifically designed to bridge 14-pin Icom portables with 10-pin DIN mobile accessory ports. 800 mm Cable Length: Provides optimal reach for convenient bench-top or in-vehicle cloning operations. On-Site Reliability: Robust build quality ensures consistent performance for professional technicians during field updates. Efficiency Boost: Streamlines the programming workflow by enabling rapid fleet synchronization without a laptop. Genuine Icom Engineering: Tailored specifically for modern F-series P25 and IDAS™ digital radios to ensure 100% data integrity. Specifications Feature Specification Product Type Zone Copy / Cloning Cable Interface Handheld to Mobile Length 800 mm Connectors 14 Pin to 10 Pin DIN Color Black Warranty 1-Year Manufacturer's Warranty Compatibility F7010 F7020 F7040 F5400D F6400D F7510 F7520 F7540 Recommended Accessories Icom P25 Portable Radio (F7010) Icom IDAS Mobile Radio (F5400D) Icom PC Programming Cable (OPC2363) Icom Mobile Speaker Microphone (HM220) Frequently Asked Questions What is the advantage of an 800 mm cable? The 800 mm (approx. 31 inches) length provides enough slack to comfortably connect a portable radio to a vehicle-mounted mobile radio or to perform cloning on a service bench without cable tension. Does this cable copy firmware versions? No. This cable is for cloning "Zone" and user configuration data. Firmware updates must be performed individually using a PC and the appropriate programming software. Is this compatible with 9-pin mobile accessory ports? No. This cable is specifically engineered for modern 10-pin DIN mobile accessory connectors found on the F5400D/F7500 series.   Warranty 1-year manufacturer's warranty.

Read more less

Icom ISL-P25AES The Icom ISL-P25AES is an AES activation key that enables AES in radio. *License key not eligible for further discounts.

Read more less

Icom ISL-3 The Icom ISL-3 is a P25 trunking upgrade for F9011/9511 series. *Software not eligible for further discounts.

Read more less

RedHawk - 14 pin cable connects GPS Mic to radio.

Read more less

Icom UT-128 is a DES encryption for F9011/F9511 radios.

Read more less

Secure Voice Hardware Encryption Solution Protect mission-critical public safety communications with certified hardware encryption. The Icom UT125 is an official hardware encryption module designed to safeguard high-security voice and data transmissions across APCO P25 radio networks. This high-integrity Icom UT125 Series Hardware Encryption Board for P25 Radios embeds directly inside compatible transceivers to prevent eavesdropping and unauthorized signal interception. Installing the Icom UT125 ensures full compliance with federal security mandates while maintaining crystal-clear voice clarity during tactical operations. Engineered for law enforcement agencies, federal task forces, emergency first responders, and municipal public safety teams, the UT125 series provides Over-The-Air Rekeying (OTAR) compliance for seamless remote key management. Available in multiple hardware configurations—including standard AES/DES modes and FIPS 140-2 validated modules—the UT125 series scales across both legacy and modern P25 handheld and mobile radio fleets. Key Features & Benefits Hardware Encryption Security: The Icom UT125 Series Hardware Encryption Board for P25 Radios provides physical circuit-level encryption to safeguard voice channels against eavesdropping. FIPS 140-2 Validation: FIPS-designated variants meet stringent federal information processing standards required for government and defense deployments. OTAR Compliance: Fully supports Over-The-Air Rekeying protocols to allow network administrators to update encryption keys remotely across distributed radio fleets. Seamless Internal Fitment: Mounts cleanly inside the radio's option board slot without altering the external physical dimensions or IP water-resistance rating. Flexible Algorithm Support: Offers advanced AES (Advanced Encryption Standard) and DES (Data Encryption Standard) algorithms to align with agency security protocols. Specifications Attribute Details Brand Icom Series UT125 / UT-125 Accessory Type Internal Hardware Encryption Board Encryption Algorithms AES / DES / FIPS 140-2 (Variant Dependent) Rekeying Support OTAR (Over-The-Air Rekeying) Compliant Model Variations Model Key Difference Compatibility UT125 FIPS FIPS 140-2 AES Encryption Board with OTAR Compliance F9011 / F9511 Series UT125 01 AES / DES Encryption Board with OTAR Compliance F9011 / F9511 Series UT125 FIPS-2 FIPS 140-2 Encryption Board (Requires ISL-P25AES License Key) F7010 / F7020 / F7040 / F7510 / F7520 / F7540 Series Compatibility F9011 F9511 F7010 F7020 F7040 F7510 F7520 F7540 Recommended Accessories Compatible Radios Icom F7010 / F7020 / F7040 Public Safety Portable Radios – High-performance P25 digital handheld transceivers compatible with the UT125 FIPS-2 encryption board. Icom F7510 / F7520 / F7540 P25 Mobile Radios – P25 digital mobile transceivers engineered for vehicle installations. Licensing & Software Keys Icom ISL-P25AES License Key – Required software activation license key to enable AES encryption functionality on UT125 FIPS-2 hardware installations. More Resources Exploring Encryption Options for Secure Radio Communications 4 Advantages of Having Two-Way Radio Encryption Police and Law Enforcement Radios Explained Browse All Icom Radio Accessories & Parts Frequently Asked Questions What is the primary difference between the UT125 FIPS and the UT125 01? The UT125 FIPS is validated to FIPS 140-2 standards for government AES security requirements, whereas the UT125 01 provides standard AES and DES encryption algorithms for general P25 operations. Does the UT125 FIPS-2 require a separate license key to activate AES? Yes, the UT125 FIPS-2 module requires the Icom ISL-P25AES software license key to unlock full AES encryption functionality on F7010, F7020, F7040, F7510, F7520, and F7540 series radios. What is OTAR and why is it important for the UT125 series? OTAR (Over-The-Air Rekeying) allows system administrators to securely rekey or manage encryption keys across an entire radio fleet over the air, eliminating the need to physically program each device manually. Can I install the UT125 encryption board myself? While the board installs into an internal option slot, installation and Key Variable Loader (KVL) provisioning by an authorized Icom technician or qualified radio programmer is strongly recommended. Which encryption board variant should I buy for an F7020 radio? For the Icom F7020 series (as well as F7010, F7040, F7510, F7520, and F7540), you must select the UT125 FIPS-2 variant along with the ISL-P25AES license key. Will installing the encryption board affect my radio's IP water resistance rating? No, as long as the radio chassis is properly opened and resealed according to factory service guidelines using intact internal gasket seals.   Warranty 1-year manufacturer's warranty.

Read more less

Interface cable with 14 pin between P25 radios & KA KVL125

Read more less

Icom SS BC63 MOBILE RAPID CHARGER FOR F9011 SERIES The SS BC63 is a mobile rapid charger with cigarette adapter for the F9011 series. SS BC-63 COMPATIBILITY: F9011T F9011S F9011B

Read more less

Icom BC121NS Charger RAPID MULTI-CHARGER FOR F9011 & F9021 The BC-121NS is a six-unit charger with AD110 replaceable cups for lithium-ion battery packs, BP253 and BP254. This charging unit requires a BC157S AC adapter. BC-121NS COMPATIBILITY: F9011 F9021 F70 F80 WARRANTY * 1-year manufacturer's warranty.

Read more less